Tenda P3 User Manual

3
while
/
Off
The WiFi is disabled.
Green
Solid on
The WiFi is enabled.
Green
Quick Blinking
The device is performing WiFi cloning.
Buttons & Ports for PA6
Button/Port
Description
 Press it to perform pairing process.
 When the device is in standby mode, press it to wake up it.
 When the WiFi function is enabled, press it to perform WiFi cloning process.
 Hold it down for about 6 seconds to disable WiFi.
 When the WiFi function is disabled, press it to enable WiFi.
Reset
Hold it down for about 6 seconds to restore to factory settings.
LAN
Used to connect to wired devices, such as computer, router, and so on.
Label for PA6
1: It specifies the MAC address of PA6.
2: It specifies the default WiFi name of PA6.
1
2

Tenda P3 Specifications

General

Brand	Tenda
Model	P3
Category	Extender
Language	English