Tenda P3 User Manual

16
recognition, for example, First floor Adapter.
MAC Address
It specifies the MAC address of the powerline device.
Tx Rate
It specifies rate at which the device transmits data over the powerline network.
Rx Rate
It specifies rate at which the device receives data over the powerline network.
3.4 Adminstration
3.4.1 Changing the Login Password
The Login password is used to log in to the web UI of PA6. The default one is admin.
Perform the following steps if you want to change it.
Step 1 Log in to the web UI of PA6, choose Administration, and move to Login Password part.
Step 2 Set Old Password to the current password admin.
Step 3 Set New Password to a new password.
Step 4 Set Confirm Password to the new password again.
Step 5 Click OK in the lower-right corner of the page to apply the settings.
--End

Tenda P3 Specifications

General

Brand	Tenda
Model	P3
Category	Extender
Language	English