2.3 ANSI Safety Sign Location
The safety signs are located in/on the machine as indicated. (Descriptions of the
symbols are provided in section 2.2)
Key
1. Fall hazard
2. Crush hazard (lift arms)
3. Fire hazard (read manual, inside cab)
4. Skin (oil) injection hazard (outside of cab)
5. Burn hazard (engine compartment)
6. Explosion / burn hazard (read operator’s manual, engine compartment)
7. Tie down location
8. Crush hazard (run over)
9. Crush hazard (lift arm brace)
2 SAFETY
12