• Do not attempt to lift heavy parts. Use work aids with sufficient carrying
capacity designed for that purpose. Fasten and secure individual parts and
large assemblies carefully on lifting equipment to minimize the possibility of
objects falling. Use only suitable lifting equipment with no technical defects.
Do not work under suspended loads.
• Use only climbing aids and work platforms that meet safety requirements
for assembly tasks above body height. Do not use machine parts as
climbing aids if they were not designed for that purpose.
• If working at significant height, use a safety harness of the proper style and
capacity to prevent falls. Keep all grips, steps, platforms, ladders, etc. free
of dirt, snow and ice.
2.19 Battery (corrosive)
• Use caution, wear face shield, safety gloves, and any other appropriate
safety equipment when working near or with the battery. The battery
contains acid and should be handled with care.
• DO NOT smoke or allow open flame or sparks near the battery. Explosion
could result.
• When disconnecting the battery, disconnect the negative
terminal first.
• When connecting the battery, connect the negative
terminal last.
2 SAFETY
26
RT-60/R160T/R190T ROW O&M
0404-659 2016-05
To Next Page
Loading...
Need help?
General
