RMX SERIES
-XIV
483018 - 3/15 Terex South Dakota RMX Series
SAFETY RELATED DECALS
SAFETY RELATED DECALS
Safety signs are designed and fitted to the product to warn of possible dangers, and MUST be replaced
immediately if they become unreadable or lost. If the product is repaired and parts have been replaced on
which safety signs were fixed, be sure new safety signs are fitted before the product is put into service. Use
mild soap and water to clean safety signs - DO NOT use solvent based cleaners, as they may damage the
safety sign material.
NOTE: *Use decal 419265 and 465703 when Aerial Device is not certified in accordance with
latest ANSI A92.2 revision or booms are not insulated.
Operating this equipment without all safety and control decals in place can be hazardous.
ITEM # DECALS QTY. PART #
1. PLATFORM NOT INSULATED 1 47988
2. ARROWS 18’ H21503
3. NOT INSULATED BEYOND ARROWS 8 402236
4. READ CAREFULLY 1 414590
5. FAILURE TO OBEY 1 419262
6. ELECTROCUTION HAZARD 2 419263
7. FALLING FROM PLATFORM 1 419264
8. * ELECTROCUTION HAZARD - NOT INSULATED 2 419265
9. ELECTROCUTION HAZARD - KEEP CLEAR 3 419266
10. UNTRAINED OPERATOR 2 419267
11. OUTRIGGER - CRUSHING - DO NOT OPERATE 2 419268
12. OUTRIGGER - CRUSHING -STAND CLEAR 4 419269
13. CONDUCTIVE HOSE 1 419270
14. OVERTURNING HAZARD 2 458696
15. SLOPE INDICATOR 2 486277
16. CONTROLS NOT INSULATED 2 463602
17. * NOT INSULATED 4 465703
18. ANSI WARNING 1 468476
19. MAINTENANCE RECORD 1 489119
20. LANYARD ATTACHMENT, X2 (depending on boom tip option) 1 495440
21. LANYARD ATTACHMENT, X1 (depending on boom tip option) 1 495441
22. TRUCK COMPUTER 1 495845
23. FALL HAZARD - MAINTENANCE 1 495892
24. PINCH POINT 2 H23451
25. ESCAPING FLUID UNDER PRESSURE 1 H23877
To Next Page
Loading...
Need help?
General
