Texas Instruments TI-30XS Multiview User Manual

Copyright © 2006 Texas Instruments Incorporated 42
LOW BATTERY — Replace the battery.
Note: This message displays briefly and then disappears.
Pressing - does not clear this message.
Battery information
Battery precautions
• Do not leave batteries within the reach of children.
• Do not mix new and used batteries. Do not mix brands
(or types within brands) of batteries.
• Do not mix rechargeable and non-rechargeable
batteries.
• Install batteries according to polarity (+ and -) diagrams.
• Do not place non-rechargeable batteries in a battery
recharger.
• Properly dispose of used batteries immediately.
• Do not incinerate or dismantle batteries.
• Seek Medical Advice immediately if a cell or battery has
been swallowed. (In the USA, contact the National
Capital Poison Center at 1-800-222-1222.)
Battery disposal
Do not mutilate, puncture, or dispose of batteries in fire. The
batteries can burst or explode, releasing hazardous
chemicals. Discard used batteries according to local
regulations.
How to remove or replace the battery
The TI-30XS MultiView™ calculator uses one 3 volt CR2032
lithium battery.
Remove the protective cover and turn the TI-30XS MultiView
calculator face downwards.
• With a small screwdriver, remove the screws from the
back of the case.
• From the bottom, carefully separate the front from the
back. Be careful not to damage any of the internal parts.
• With a small screwdriver (if required), remove the
battery.

Texas Instruments TI-30XS Multiview Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Blue, Yellow
Digits	16 digits
Display type	LCD
Display tilting	No
Display number of lines	4 lines
Storage media type	-
Power source	Battery/Solar