70 Configuring Handhelds
1. From an open document, press c52 (c > Settings >
Document Settings
).
The Document Settings dialog box opens.
2. Press
e to move through the list of settings. Press £ to move
backward through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press
¢ to open the drop-down
list to view values for each setting.
4. Press the
5 and 6 keys to highlight the desired option, then press
x or · to select the value.
5. Click
OK or press x or · to apply the new settings only to the
open document.
The Home screen opens and the new settings are only applied to the
open document.
To apply the new settings to the open document and to documents
created in the future:
• Select
Make Default and press x or ·.
• Click
OK to apply the settings to any open documents and save the
settings as defaults for new documents and for Scratchpad.
Restoring Document Settings
Complete the following steps to restore the original factory settings to
open or new documents, and to the Scratchpad.
1. From the Home screen, press
52 (Settings > Document Settings).
The Document Settings dialog box opens.
To Next Page
Loading...
Need help?
General
