Texas Instruments TI-nspire CX CAS User Manual

78 Configuring Handhelds
2. To attach the handheld, face the screen upward and slide the
handheld onto the top of the TI-Nspire™ Navigator™ wireless cradle.
Be sure that both sides of the handheld are inserted into both of the
side guides.
3. Press firmly to make a good connection. When properly connected,
the TI-Nspire™ handheld appears to be sitting on top of the cradle.
4. Lock the handheld in place by sliding the lock on the back of the
cradle to the ON position.
Lock in ON
position.

Texas Instruments TI-nspire CX CAS Specifications

General

Brand	Texas Instruments
Model	TI-nspire CX CAS
Category	Calculator
Language	English