19
5344
Manual Drip Tray Drain Operation
Push to Drain
Drip Tray
Hot Liquid Container Removal
A Prepco hot liquid container is located in the upper section of the galley. The
hot liquid container holds one gallon and is easily removed for filling. The master
control switch panel in the galley header controls the heater in the hot liquid
container (see previous page for switch operation).
To remove and fill hot liquid
container:
1. Lift up on the bottom of
the hot liquid container
door and rotate up 90
degrees.
2. Slide door back.
3. Lift up slightly on the
front of the hot liquid
container and slide
forward to remove.
Caution: Be careful
when removing, the
hot liquid container
may be HOT.
Unscrew
Lid to Fill
Caution: Do NOT remove hot liquid container while tank heater is turned on.
To Next Page
Loading...
Need help?
General
