User’s manual User’s manual
GB
57
2.2 - Switching your radiator on/off
At the rst powered, the
screen lights up.
Pilot Intel ON, the open
window and Sweet
Control (detection of
presence / absence) are
displayed.
The intelligent control is
enabled (see page 11)
To disable the intelligent
control, press AUTO.
The radiator displays
OFF «then turn off.
2.2.1 - Switch the screen on
If the screen is not
backlit, press any
button to switch the
screen on.
The screen lights up
2.2.2 - Choose the heating mode
A slight smell may occur the rst time that the radiator is heated. This is caused by the
elimination of traces left during manufacturing of the radiator and will disappear after a few
moments of operation.
Pictogram Description When to use this mode
Comfort When you are at home.
Eco When you are out for 2 to 48h or asleep.
Frost free
If you are away for more than 48h or in the summer. The
Frost free temperature is xed to about 7°±3 C and you
cannot modify it.
Comfort -1
These comfort modes are accessible only with the
using of the detector if your installation is provided with
a power manager.
Comfort -2
2.3 - Temperature setting
The default temperature
is 19°C.
You can vary it by
pressing the or
buttons.
Press the button
to conrm
The heating light indicator
is displayed on the screen if the ambient temperature is
lower than the displayed temperature (set temperature).
Wait for at least 6 hours until the temperature stabilises.
The black arrow moves along the consumption indicator between the green and the red
depending on the level set temperature required. The Comfort temperature recommended
by Ademe (French Agency for the Environment & Energy control) is 19°C, and this arrow
informs you if your behaviour is within or outside the recommendation.
Equateur2_1880-1585_interieur.indd 57 18/06/12 06:22
To Next Page
Loading...
Need help?
General
