39
9
ADJUSTMENT
ENOM00073-A
ENOW00074-A
Do not overtighten the steering friction
lever it could result in difficulty of move-
ment resulting in the loss of control caus-
ing an accident and could lead to severe
injury.
ENON0925-0
Note
The steering adjust screw is used to adjust
the friction load of the steering, but not to fix
the steering. Excess tightening of the
adjustment screw may cause damage to
the swivel bracket.
Adjust this lever to achieve the desired
steering friction (drag) on the tiller handle.
Move lever towards (2) to tighten friction
and move lever towards (3) to loosen fric-
tion.
1. Steering friction bolt
2. Heavier
3. Lighter
1. Steering friction
WARNING
To Next Page
Loading...
Need help?
General
