ENGINE OPERATION 33
1. Air vent screw
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the tank cap.
For USA and Canada model
1. Full open the air vent screw on the tank
cap and release internal pressure.
1. Air vent screw
2. Tab lo ck
2. Loosen the tank cap until it contacts
the tab lock and release internal pres-
sure completely. After that, press down
the tab lock and open the tank cap.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the tank cap
until two clicks sound is heard.
ENOM00044-0
Except for USA and Canada
model
1. Full open the air vent screw on the tank
cap.
2. Open the fuel tank cap slowly and
release internal pressure completely.
After that, close the fuel tank.
3. Connect the fuel connector to the
engine and squeeze primer bulb until it
becomes stiff to feed fuel to carburetor.
Direct arrow mark upward when prim-
ing.
1
ENOF00027-0
ENOF00028-0
1
2
ENOF00029-0
2. Feeding the fuel
ENOF00030-0
MFS25-30B_EN.book Page 33 Wednesday, December 12, 2012 11:58 AM
To Next Page
Loading...
Need help?
General
