INSPECTION AND MAINTENANCE58
ENOM00080-0
Maintaining engine oil
If the engine oil is low, the life of the engine
will be shortened significantly.
ENOM00081-0
Checking oil level
1. Stop the engine and set it in a vertical
position.
2. Remove the top cowl.
3. Remove the dipstick.
4. Wipe oil off the oil dipstick with a clean
rag.
5. Put in the dipstick.
6. Take out the dipstick and check the oil
level.
7. Replace the dipstick.
1. Filler cap
2. Dipstick
1. Upper level 1800 mL
2. Lower level 1500 mL
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears contam-
inated.
ENOM00082-0
Replenishing engine oil
If the oil level is low, or at lowest mark, add
recommended oil to the upper dipstick
mark.
ENOW00079-0
Do not add engine oil of brand and grade
other than existing one. In case engine
oil of other brand or grade is added,
drain all oil and ask dealer for treatment.
In case other than engine oil such as
gasoline is put in the oil chamber, empty
the chamber and ask dealer for treat-
ment.
Other parts
• Check if the anode is securely installed. Repair if necessary
• Check the anode for corrosion and deformation. Replace
Item Points to Check Remedy
1
2
ENOF00080-0
CAUTION
2
1
ENOF00081-0
MFS25-30B_EN.book Page 58 Wednesday, December 12, 2012 11:58 AM
To Next Page
Loading...
Need help?
General
