TomTom Runner 3 User Manual

64
About sensors
Sensors are external devices which you can link to your watch to provide information about your
activity. Two types of sensors can be used with your watch:
 External Heart Rate Sensor - this measures your heart rate as you train. The external TomTom
Heart Rate Sensor is included in some products and available as an accessory for others.
 Cadence & Speed Sensor - this measures your cadence and speed as you cycle. The TomTom
Cadence & Speed Sensor is included in some products and available as an accessory for others.
Cadence
Cadence measures the rate at which you pedal in revolutions per minute (rpm). In a low gear, you
may have a very high cadence but a lower speed. In a high gear, you may have a low cadence but a
higher speed. Cyclists train to find the balance between cadence and speed which allows them to
cycle as efficiently as possible.
External Heart Rate Sensor
To use the external TomTom Heart Rate Sensor with your watch, do the following:
1. Attach the monitor to the strap.
2. Attach the strap around your chest, so the monitor sits just above the base of your chest bone.
Make sure the monitor is the right way up so that the word TomTom is the right way up for
someone standing in front of you.
Tip: Wet the sensors on the inside of the strap before placing it around your chest. This makes
it easier for the sensor to pick up your heartbeat.
3. From the Clock screen on your watch, press DOWN.
4. Select SENSORS then press RIGHT.
Adding sensors

TomTom Runner 3 Specifications

General

Band size	L
Product color	Black, Green
Water resistance	5 ATM
Waterproof up to	40 m
Market positioning	Sport watch
Protection features	Water resistant
Vibrating alert	Yes
Recommended activity	Cycling, Running, Swimming
Languages support	Multi
Battery life (max)	3 week(s)
Battery life (GPS mode)	11 h
Display resolution	144 x 168 pixels

Weight and Dimensions

Weight	49 g
Thickness	11.5 mm