3.4- DESTINATION OF USE
THE DEVICE HAS BEEN DESIGNED AND MANUFACTURED ONLY TO FEED AND
CONTROL "ORIGINAL TOPP" MOTORS: WINDOW AUTOMATION ACTUATORS - MOD.
C20 - C25 - C30 - C40 - ACK4 - C130 - C240- SL60- T50 - T80.
3.5- USE LIMITS
The device has been designed and manufactured exclusively for the destination of use
given in par.3.4, therefore, any other type of use is strictly forbidden in order to assure
in any moment the safety of the installer and of the user, as well as the efficiency of the
device itself.
IT IS STRICTLY FORBIDDEN TO USE THE DEVICE FOR IMPROPER USES,
DIFFERING FROM THE ONE FORESEEN BY THE MANUFACTURER (SEE PAR.3.4).
IT IS STRICTLY FORBIDDEN TO INSTALL THE DEVICE ON THE EXTERNAL SIDE OF
THE ROOM SUBJECT TO ATMOSPHERIC AGENTS (RAIN, SNOW, ETC.).
THE USE OF THE DEVICE IN ENVIRONMENTS WITH POTENTIALLY EXPLOSIVE
ATMOSPHERE IS STRICTLY FORBIDDEN.
IT IS COMPULSORY TO KEEP THE PACKAGE AND THE DEVICE OUT OF REACH OF
CHILDREN.
3.6- PACKAGE
Each standard package of the product (cardboard box) contains:
• No. 1 Feeding and control unit for 24VDC/230VAC motors;
• No. 3 Fairleads (ø 6) for connection cables;
• No. 1 Package with dowels and fastening screws;
• No. 1 Installation and use instructions.
MAKE SURE THAT THE ABOVE DESCRIBED COMPONENTS ARE CONTAINED IN THE
PACKAGE, AS WELL AS THAT THE DEVICE HAS NOT BEEN DAMAGED DURING
TRANSPORT.
SHOULD ANY ANOMALY BE DETECTED, IT IS FORBIDDEN TO INSTALL THE DEVICE,
AND IT IS COMPULSORY TO REQUIRE TECHNICAL ASSISTANCE FROM YOUR
DEALER OR THE MANUFACTURER.
THE PACKAGING (PAPER, PLASTIC, ETC.) HAS TO BE DISPOSED ACCORDING TO
THE LAWS IN FORCE.
EX
9
ISTRUZIONI PER L'INSTALLAZIONE E L’USO
TF24R/44R
3- TECHNICAL DESCRIPTION
To Next Page
Loading...
Need help?
General
