Maintenance Check Item For the week of:
Mon. Tues. Wed. Thurs. Fri. Sat. Sun.
Touch-up damaged paint.
1. Check the glow plug and injector nozzles if the engine starts hard, produces excess smoke, or runs rough.
2. Check with the engine running and the oil at operating temperature.
3. Immediately after every washing, regardless of the interval listed
IMPORTANT
Refer to your engine operator’s manual for additional maintenance procedures.
Notation for Areas of Concern
Inspection performed by:
Item Date Information
1
2
3
4
5
Pre-Maintenance Procedures
Preparing for Maintenance
1. Park the machine on a level surface, disengage the PTO, lower the cutting units, and
engage the parking brake.
2. Shut off the engine, remove the key, wait for all moving parts to stop, and allow the
engine to cool.
Maintenance: Pre-Maintenance Procedures Page 6–5 3464-490 A
To Next Page
Loading...
Need help?
General
