• If the engine m ust be r unning to perfor m a
maintenance adjustment, k ee p hands , feet,
clothing, and any par ts of the body a w a y from
the cutting unit, attac hments , and any mo ving
par ts , especially the screen at the side of the
engine . K ee p ev er y one a w a y .
• T o ensure safety and accuracy , ha v e an
A uthorized T oro Distributor c hec k the
maxim um engine speed with a tac hometer .
Maxim um g o v er ned engine speed should be
3600 RPM.
• If major re pairs are ev er needed or if assistance
is desired, contact an A uthorized T oro
Distributor .
• Use only T oro-appro v ed attac hments and
re placement par ts . T he w ar ranty ma y be
v oided if used with unappro v ed attac hments .
Sound Pressure for a Flex 18
T his unit has a maxim um sound pressure lev el
at the operator’ s ear of 85 dB A, based on
measurements of identical mac hines per EN 11094
and EN 836.
Sound Power for a Flex 18
T his unit has a guaranteed sound po w er lev el
of 96 dB A, based on measurements of identical
mac hines per EN 11094.
Vibration for a Flex 18
T his unit does not ex ceed a hand/ar m vibration
lev el of 2.50 m/s
2
, based on measurements of
identical mac hines per EN 1033.
Sound Pressure for a Flex 21
T his unit has a maxim um sound pressure lev el
at the operator’ s ear of 85 dB A, based on
measurements of identical mac hines per EN 11094
and EN 836.
Sound Power for a Flex 21
T his unit has a guaranteed sound po w er lev el
of 98 dB A, based on measurements of identical
mac hines per EN 11094.
Vibration for a Flex 21
T his unit does not ex ceed a hand/ar m vibration
lev el of 2.50 m/s
2
, based on measurements of
identical mac hines per EN 1033.
7