Product Overview
g374230
Figure 8
1. Button latch 6. Bar cover knob
2. T rigger lock
7. Guide bar cover
3. Front handle
8. Cutting guide
4. Oil cap 9. Guide bar and chain
5. T rigger
g330065
Figure 9
1. Battery charger Model
88610 (included with
Model 51870)
2. Battery pack Model 88620
(included with Model
51870)
Specications
Model
51870/51870T
Bar Length (with 88619 and
88621 equipped)
25.4 cm (10 inches)
Chain Gauge (with 88619
and 88621 equipped)
0.050 inches
Chain Pitch (with 88619 and
88621 equipped)
1/4 inch
Chain Length (with 88619
and 88621 equipped)
58 links
Rated V oltage
60V DC maximum, 54 VDC
nominal usage
W eight (without a battery) 4.1 kg (9 lbs)
Charger T ype
T oro 60V lithium-ion chargers
Battery T ype
T oro 60V lithum-ion batteries*
*If you are using this machine with a battery pack
that is 4.0 Ah or greater you must install the included
quick-release harness for proper support and balance.
Appropriate T emperature Ranges
Charge/store the battery pack
at
5°C (41°F) to 40°C (104°F)*
Use the battery pack at
-30°C (-22°F) to 49°C (120°F)*
Use the tool at
0°C (32°F) to 49°C (120°F)*
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
Attachments/Accessories
A selection of T oro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized T oro
distributor or go to www .T oro.com for a list of all
approved attachments and accessories.
T o ensure optimum performance and continued safety
certication of the machine, use only genuine T oro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous.
14
To Next Page
Loading...
Need help?
General