Toro ProLine Hydro User Manual

13
Setup
Note: Determine the left and right sides of the machine
from the normal operating position.
Loose Parts
Note: Use the chart below to identify parts for assembly.
Step Description Qty. Use
1
No parts needed – Removing the shipping bracket
2
Handle assembly
Flanged bolt 3/8 x 1 inch
Flanged bolt 3/8 x 1–1/4 inch
Flange nut 3/8 inch
1
2
2
4
Installing the handle assembly
3
Fuel tank with studs installed
Locknut, 5/16 inch
Bolt, 5/16 x 7/8 inch
Lock washer, 5/16 inch
Washer, 5/16 inch
Spring
Hose clamp
1
2
2
2
4
2
1
Installing the fuel tank
4
E–ring 2 Installing the control rods
5
Washer
Cotter pin
1
1
Installing the speed control rod
6
Hairpin cotter pin
Spacer
2
6
Installing the hairpin cotter pins and
spacers
7
No parts needed – Checking the tire pressure
8
No parts needed –
Checking the hydraulic fluid and engine
oil
9
No parts needed – Setting up the hydro control linkage
10
Oil drain hose
Operator’s Manual
Engine Operator’s Manual
Safety Video
Parts Catalog
Registration card
1
1
1
1
1
1
Use for draining the engine oil
Read before operating machine
Read before operating machine
Watch before operating machine
Fill out and return to Toro

Toro ProLine Hydro Specifications

General

Brand	Toro
Model	ProLine Hydro
Category	Lawn Mower
Language	English