Toro Workman MD Service Manual

Rev. A
Workman MDPage 4 -- 2Single Cylinder Gasoline Engine
General Information
This Chapter gives information about specifications,
maintenance, troubleshooting, testing and repair of the
single cylinder gasoline engine used in the Workman
MD.
Workman MD vehicles with serial numbers below
311000000 have an engine that is identified as a Kohler
Command Pro CS engine. Workman MD vehicles with
serial numbers above 311000000 have an engine that
is identified as a Yamaha MZ360 engine. From a service
standpoint, these engines are essentially the same. The
Kohler Service Manual for COMMAND PRO CS Series
Engines is included at the end of this chapter and can be
used when servicing either brand of engine.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Kohler Service Manual for
COMMAND PRO CS Series Engines and the use of
some specialized test equipment is explained. The cost
of the test equipment and the specialized nature of
some repairs may dictate that engine work be done at
an engine repair facility.
Service and repair parts for the engine used in the Work-
man MD can be provided by your local Toro distributor.
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your Workman MD vehicle. Refer to the Op-
erator’s Manual for additional information when servic-
ing the machine.

Toro Workman MD Specifications

General

Brand	Toro
Model	Workman MD
Category	Utility Vehicle
Language	English