English - 11 -
Select your • Country, Language and Text language by
using the navigation buttons. Press OK or RED button to
continue. To cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table will appear •
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Digital Manual Tuning
The feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known.
Select • Channel Search from the Installation menu and
press OK.
Enter the multiplex number using the numeric buttons. •
The television will automatically search for that multiplex.
When the multiplex is found any channels not currently
on the programme list will be added and the programme
information at the top of the screen will be updated.
Repeat as necessary. •
Note: Press SOURCE button to switch between TV/DTV.
Analogue Manual Tuning
The television can be tuned-in manually. For example: if
the television cannot be connected to a media recorder/
decoder with a SCART lead or to tune-in a station on another
System.
To allocate a programme position on the television for a
decoder and media recorder: turn the decoder on, insert a
pre-recorded fi lm into the media recorder and press PLAY,
then manually tune.
Press • MENU and using the Left or Right button select
Install menu.
Using the • Down button select Program and key in the
programme position to be tuned with the number buttons,
we suggest Programme 0 for a media recorder.
Use the Down button• to select Search then press the Left
or Right button to search. The television will begin searching
for channels.
Each signal will show on the television, if it is not your •
media recorder press the Left or Right button to restart
the search.
When your media recorder signal is found, save the selection •
by pressing the Down button until Store is highlighted, then
press the Left/Right or OK button to save.
Repeat for each • programme position to be tuned then press
BACK to fi nish.
Note: Press SOURCE button to select between
TV or DTV.
Auto Tuning continued, Manual Tuning
The television can be tuned-in manually using Manual Tuning feature.
00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 1100_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 11 17.05.2010 16:43:2417.05.2010 16:43:24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
