Toshiba 19BV500B User Manual

English - 7 -
Connecting an HDMI® or DVI Device to the HDMI
Input
The HDMI input on your television receives digital audio and
uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
NOTE:
Some early HDMI equipment may not work properly with •
your latest HDMI TV.
Supported Audio format: Linear PCM, sampling rate •
32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to the HDMI
terminal. For proper operation, it is recommended that you
use an HDMI cable with the HDMI Logo ( ).
If your HDMI connection is capable of 1080p and/or your •
television is capable of refresh rates greater than 50Hz,
you will need a Category 2 cable. Conventional HDMI/DVI
cable may not work properly with this mode.
HDMI cable transfers both video and audio. Separate •
analogue audio cables are not required (see illustration).
To view the HDMI device video, press the • SOURCE button
to select HDMI.
HDMI Input
Socket
HDMI device
HDMI
To Connect a DVI Device
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI terminal and audio cables to the PC/
Side AV/YPbPr sockets (see illustration).
The recommended HDMI-to-DVI adaptor cable length is •
6.6 ft (2m).
An HDMI-to-DVI adaptor cable transfers video only. •
Separate analogue audio cables are required.
HDMI Input
Socket
HDMI to DVI
Adapter Cable
(not supplied)
Audio cable for HDMI to
television connection
(not supplied)
HDMI
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
When turning on your electronic components, turn on the •
television fi rst, and then the HDMI or DVI device.
When turning off your electronic components, turn off the •
HDMI or DVI device fi rst, and then the television.
00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 700_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 7 17.05.2010 16:43:1917.05.2010 16:43:19

Toshiba 19BV500B Specifications

General

Audio system	NICAM
RMS rated power	5 W
Number of speakers	2
Child lock	Yes
Audio formats supported	MP3
Image formats supported	JPG
Operating temperature (T-T)	5 - 35 °C
Display diagonal	19 \
Display brightness	250 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:10
Supported video modes	720p
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	8000:1
Screen format adjustments	4:3, 16:9
Viewing angle, horizontal	170 °
Supported graphics resolutions	1280 x 720 (HD 720)
RS-232 ports	0
SCART ports quantity	1
Card reader integrated	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Battery type	AAA
Headphone connectivity	3.5 mm
Remote control type	RC-3910
Product color	Black
LED indicators	Y, Stand-by
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	1 W
Power consumption (typical)	45 W
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-T

Weight and Dimensions

Weight (with stand)	4500 g
Depth (without stand)	63 mm
Width (without stand)	460 mm
Height (without stand)	340 mm
Weight (without stand)	4200 g