September 1997 © TOSHIBA CORP. 1 - 23 2460 ADJUSTMENT
1.4 Image Density
If the user wants to change the image density, adjust the image density in adjustment mode “05.”
Original mode
Adjustment item Remarks
Photo/Text
Photo Text
500 501 502
Standard PPC
Manual exposure center value
The larger the value, the darker the image
505 506 507 Light side
Manual exposure step value
The larger the value, the lighter the light range
508 509 510 Dark side
The larger the value, the darker the dark range
511 512 513
Standard PPC
Automatic exposure
The larger the value, the darker the image
Code
Follow the procedure below to adjust the image density to suit the user’s preferences while comparing
the image obtained in the test copy and the currently entered allowable values.
<Keys used in operation> <Display messages>
PWR
Digital keys : Enter code.
START
Digital keys
:
Enter adjustment
value.
used to
correct value
INTERRUPT
ENERGY
SAVER
: Test copy
Return to 1 to
repeat adjustment.
: Adjustment mode
canceled.
Code becomes “xxx” according
to the entered code.
Code No.
Entered adjust-
ment value
(If no enter, YYY)
Current entered adjustment value
Values “zzz” are stored in
BC-RAM in place of
“YYY”.
Notes:1) Only one copy of single-sided originals can be made.
2) Duplex copying and memory copying cannot be carried out.
Make test copies in these modes after canceling the adjustment mode.
1
TEST MODE
TEST MODE
TEST MODE
WAIT WARMING UP
COPYING
100%
100%
A3
A
XXX
0 5
0 9
ZZZYYY
C/S
100%
A3
A
100%
A3
A
100%
A3
A
A3
To Next Page
Loading...
Need help?
General