2460 ADJUSTMENT 1 - 40 September 1997 © TOSHIBA CORP.
100%
100%
A3
A
XXX
0
1
5
0 9
ZZZYYY
C/S
100%
A3
A
100%
A3
A
A3
<Keys used in operation> <Display messages>
PWR
Digital keys
: Enter code.
START
Digital keys
:
Enter adjustment value.
used to
correct value
INTERRUPT
ENERGY
SAVER
: Test copy
Return to 1 to repeat adjustment.
: Adjustment mode canceled.
Code becomes
“xxx” according to
the entered code.
Code No.
Entered adjustment
value
(If no enter, YYY)
Current entered adjustment value
Values “zzz” are stored in
BC-RAM in place of “YYY”.
Notes:1) Only one copy of single-sided originals can be made.
2) Duplex copying and memory copying cannot be carried out.
Make test copies in these modes after canceling the adjustment mode.
TEST MODE
TEST MODE
TEST MODE
COPYING
1.7 Sharpness (HPF) Adjustment
If the user wants to change the image sharpness to softer or harder, adjust the HPF intensity in
adjustment mode “05”.
Image mode
Adjustment item Remarks
Photo/Text
Photo Text
Code
620 621 622 HPF intensity
1st digit : 0 (fixed)
2nd digit: 0: Use default value
1~9: Change the intensity
(If the value is increased, the sharp-
ness is increased)
To Next Page
Loading...
Need help?
General