Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR.
You will also be able to record from one TV channel while watching
another channel.
Stereo VCR/ Playback
To antenna
TV
You will need:
• two coaxial cables
• two sets of standard A!V cables
Note:
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
For better picture quality, if your VCR has S-
video, you can use an S-video cable instead
of the standard video cable. Do not connect a
standard video cable and an S-video cable to
VIDE01 simultaneously.
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
Camcorder
You will need:
• one set of standard A!V cables
Note:
For better picture quafity, if your camcorder
has S-video, you can connect an S-video
(and standard audio cables) to VIDEO 1 on
the back of the TV Do not connect a standard
video cable and an S-video cable to VIDE01
simultaneously.
Front Panel of TV
Connecting an audio amplifier
This connection allows you to use an audio amplifier to enjoy a high-
quality sound. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier.
Audio Amplifier
TV
To cable,
cable box
or antenna
You will need:
• one coaxial cable
• one pair of audio cables
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
10
To Next Page
Loading...
Need help?
General
