Toshiba 27AF43 User Manual

Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or
converters, you first have to program your remote control. (See
"Programming the remote control for use with a VCR, DVD player, or
cable TV converter" on page 12.)
Installing the remote control batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and - signs on the
batteries to the signs on the battery compartment.
Note:
The TV remote control may or may not
operate your VCR, DVD player, or cable TV
converter. Refer to the owner's manuals
supplied with the equipment to see which
features are available. In addition, the original
controllers may have features not available on
this remote control If you would like to
continue to use these features, you may want
to use the original remote control
Cautions:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote control
for a long time, remove the batteries.
3. Close the battery cover on the remote control until the lock snaps.
Using the remote control with a VCR, DVD player, or cableTV converter
To control a VCR: VCR
Program the remote Power
control to recognize
the brand of your VCR
(see "Programming the Channel
remote control for use Numbers
with a VCR, DVD
player, or cable TV
converter" on page
12). The buttons Channel+/-
shown at right will then
control the VCR. Press Enter
the VCR button first.
Fast Forward
Play
Rewind
TV/VCR
Record
Stop
VCR CH A/V
Pause/Still
To control a DVD
player: Power
Program the remote
control to recognize the DVD
brand of your DVD Number
player (see buttons
"Programming the DVDMENUA/Y
remote control for use
with a VCR, DVD ENTER
player, or cable TV TOP Menu
converter" on page 12). OSD
The buttons shown at
right will then control
the DVD player. Press
the DVD button first.
DVD Menu 4/1_
DVD Clear
Fast Forward
Play
Rewind
DVD Menu
Stop
DVD Skip _ /
Pause/Still
11

Toshiba 27AF43 Specifications

General

Brand	Toshiba
Model	27AF43
Category	TV
Language	English