Learning about the remote control
POWER turns the TV on and off
Sleep programs the TV to turn off at a set time (page 28)
TV/Video selects the video input source (page 27)
Channel +/- cycles through programmed channels (page 16) TVNCR/DVD/CABLE
TV/VCR/DVD/Cable select TV, VCR, DVD, or CABLE mode (page 11)
Channel Numbers allow direct access to channels (page 16)
Volume + / - adjusts the volume level
Channel
Channel Return returns to the last viewed channel (page 17) Numbers
Menu/Enter allows access to programming menus, and sets pro-
grammed menu information (page 15)
Favorite Channels A.V cycle through favorite channels (page 17) Channel +/-
Reset returns settings to preset factory formats (pages 27 and 30)
CAP/TEXT turns closed captions or text on and off (page 28)
1/2 selects closed caption/text channel 1 or 2 (page 28)
DVDMenu •
Mute turns off the sound (page 29) Reset
MTS switches among STEREO, SAP, and MONO sound (page 29) Closed
Recall displays status information on-screen (page 27) DVDClear
Code
CODE is used to program the remote control (page 12) MTS
Rew
Exit exits programming menus (page 15) Play
16:9 toggles the aspect ratio between 4:3 (letterbox) and 16:9 (wide TV/VCR
screen) modes (page 28) Rec
Stop stops a videotape/DVD
Rec starts recording a videotape
Play plays a videotape/DVD
FF fast forwards a videotape/DVD
Rew rewinds a videotape/DVD
Pause/Still pauses a videotape/DVD
TV/VCR toggles between TV and VCR modes when viewing while
recording
VCR Channel A.V cycles through programmed channels of VCR
DMD Skip =,_ _ skips chapter of DVD
DVD Menu • • selects a desired content in the DVD
DVD Clear clears input data in the setting mode of DVD
TOP Menu allows access to TOP menu of DVD
DVD Menu allows access to DVD menu of DVD
Menu/Enter
_Ip,,
Volume +/-
TV/Video
Favorite
Channels AV
Channel Return
16:9
DVD Menu
TOP Menu
Mute
Sleep
VCR Channel
AV/DVD Skip
14
To Next Page
Loading...
Need help?
General
