SPECIFIC INFORMATIONS
– 18 –
PROCEDURES TO SET HOTEL MODE
1. Set the Channel Programs which you want the Customer to watch.
1) Use ASM (see page 16) or SEARCH (see page 16) to select the programs.
2) Choose the position you want the programs to be stored in TUNING menu.
3) Save the programs by MEMORY operation in TUNING menu (see page 16).
2. Set the Channels which you don’t want the Customer to access
1) Select the channel by pressing the number buttons or CH s/t buttons.
2) Set the SKIP from OFF to ON (see page 17).
3) Repeat above 1) & 2) for all the channels which need to be blocked.
3. Activate the HOTEL Mode:
1) Select startup channel (TV, video input 1, 2/DVD, or 3) first, then enter into design mode (see page 11).
2) In Design Mode (see page 11), press CH t button on the remote controller to show the Design Item “OPT1”.
3) Add “0x80” to the data of “OPT1” to activate the HOTEL Mode with panel buttons unlocked, or add “0xC0” to the
data of “OPT1” to activate the HOTEL Mode with panel buttons locked.
4) Turn off the TV once and turn it on again, the TV will be in HOTEL Mode with all the customer settings taking effect.
4. Set the maximum volume:
1) Enter Service Mode (see page 8).
2) Enter Design Mode (see page 11).
3) Use the CH t button on the remote controller to show the Design Item “VOLX”.
4) Adjust the “VOLX” data by pressing ;+/- buttons (Default 0x1E is equal to Volume 30 in Decimal).
5. Set the following items in HOTEL Mode:
1) Picture mode
Press h button to select the desired picture quality. “DYNAMIC”, “STANDARD”, “MILD” and “MEMORY” will appear
cyclically.
2) Sound mode
Press 8 button to select the desired sound quality. “THEATER”, “NEWS” and “MEMORY” will appear cyclically.
(Every time turning on the TV will call back the above customer setting.)
To Next Page
Loading...
Need help?
General
