Toshiba 32C110U User Manual

Chapter 4: Menu layout and navigation
23
Setup/Installation menu layout
The Installation menu contains the Terrestrial and System Status menus.
To open the Installation menu (illustrated below), press on the remote control or TV control panel, open the
Setup menu, select Installation, and press .
Icon Item Option
Terrestrial
Input Configuration
 [Opens the Input Configuration menu]
Channel Program
 [Start Scan]  [Scans for new channels on ANT/CABLE]
Channel Options
 [Opens the Skip / Lock Channel menu]
Channel Tuning Mode
 Standard / Auto / Digital
Time Zone
 Eastern / Newfoundland / Atlantic / Hawaii / Alaska /
Pacific / Mountain / Central
Signal Meter
 [Opens the Signal Meter menu]
System Status
System Information
 [Opens the System Information screen]
Navigating the menu system
You can use the buttons on the remote control or TV
control panel to access and navigate your TV’s on-
screen menu system.
•
Press to open the menu system.
•
When a menu is opened, use the up/down/left/
right arrow buttons (pqtu) on the remote
control or pq on the TV control panel to move
in the corresponding direction in the menu.
•
Press to save your menu settings or select
a highlighted item. (A highlighted menu item
appears in a different color in the menu.)
•
All menus close automatically if you do not make
a selection within 60 seconds, except the signal
meter menu, which closes automatically after
about 5 minutes.
•
To close a menu instantly, press .
Note:
The menu background may sometimes appear
black, depending on the signal the TV is
receiving. This is not a sign of malfunction.

Toshiba 32C110U Specifications

General

Package depth	187.9 mm
Package width	876 mm
Package height	586.9 mm
Package weight	13500 g
Display diagonal	32 \
Progressive scan	Yes
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	60 Hz
Supported video modes	720p
Supported graphics resolutions	1366 x 768
Audio formats supported	MP3
Image formats supported	JPG
SCART ports quantity	0
Card reader integrated	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out	1
Package weight (imperial)	29.76 lbs
Weight (with stand) (imperial)	20.94 lbs
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	200 x 100 mm
RMS rated power	14 W

Weight and Dimensions

Depth (with stand)	245 mm
Width (with stand)	792.7 mm
Height (with stand)	551.7 mm
Weight (with stand)	9500 g
Depth (without stand)	89.4 mm
Height (without stand)	503.4 mm
Weight (without stand)	8900 g