INITIAL SETTINGS
2-17
The unit’s Remote Reception feature is designed to allow you to activate fax reception
from an extension telephone. The Remote Reception function operates even when
the FAX Signal Receive function is turned off. When you hear the fax tone, simply
press the one-digit Fax Remote Number (Factory setting: 5) and
. Follow the two
procedures below to use this feature.
Notes:
•
If documents are set in the ADF, the unit does not respond to pressing Fax Remote
Number and
. However, if the originals are set in the ADF as a part of a copy job
in progress, the unit answers when you press the Fax Remote Number and
.
•
If you want to receive a fax while you are on an extension telephone, when you hear
a fax tone, press the one-digit Fax Remote Number and
. To ensure proper fax
reception, hang up the extension phone only after you have confirmed that fax
reception has begun. Confirm that the fax reception has begun by having the
extension telephone connected directly to the fax. Furthermore, there is no sound
when fax reception begins.
Turning on Remote Reception:
Factory setting: 1 (ON)
Step Press these keys Comments
1 “OPTION SETTING” will appear
in the display.
Fax Setup
2 “REMOTE RECEPTION” will
appear in the display.
3 Press 1 to turn Remote
Reception on, or 2 to turn it off.
4 Press the STOP key twice to
exit.
Using the Remote Reception Function
FUNCTION
GHI
or
ABC
STOP
STOP
To Next Page
Loading...
Need help?
General
