4.EDITING FUNCTIONS
Sheet Insertion 141
4 EDITING FUNCTIONS
8
Select other copy modes as required, and then press the [START] button on the control
panel.
When the originals are placed on the RADF, scanning and copying start.
When they are placed on the original glass, follow steps 9 and 10.
9
Place the next original, and then press [NEXT COPY] on the touch panel or the [START]
button on the control panel.
Scanning of the next original starts. Repeat this procedure until the scanning of all the originals is
finished.
10
When the scanning of all the originals is finished, press [JOB FINISH] on the touch
panel.
Copying starts.
To Next Page
Loading...
Need help?
General
