2 HOW TO MAKE COPIES
34 Placing Originals
Placing originals on the original glass
The original glass can be used for originals such as OHP films or tracing paper, as well as plain paper, that
cannot be placed on the RADF.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
1
Raise the Original Cover or the RADF.
Raise it 60 degrees or more so that the size of the original can be detected correctly.
3
Lower the Original Cover or the RADF carefully.
When it is being closed, the scanner lamp flashes to detect the original size.
2
Place the original with its face down on the original
glass and align it with the left rear corner of the glass.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP films
or tracing paper, place a blank sheet, which is the same size as
the original or larger, over the original.
To Next Page
Loading...
Need help?
General
