3 BASIC COPY MODES
Setting Original Modes 71
Setting Original Modes
You can make copies with the optimal image quality by selecting the following modes for your original. The
selectable original mode differs depending on the color mode as shown in the table below. Select the color
mode first, and then the original mode.
TEXT/PHOTO is set by default. The default setting can be changed in each color mode. For details, refer
to the MFP Management Guide.
1
Press [ORIGINAL MODE] on the touch panel.
Original
mode
Description
Color mode
FULL
COLOR
BLACK
AUTO
COLOR
TEXT/PHOTO Originals with text and photographs mixed Yes Yes Yes
TEXT Originals with text (or text and line art) only Yes Yes Yes
PRINTED
IMAGE
Originals with photogravure (e.g. magazine,
brochure)
Yes—Yes
PHOTO
Originals with general photographs on
photographic printing paper
Yes — —
Originals with photographs — Yes —
MAP Originals with fine illustrations or text Yes — —
IMAGE
SMOOTHING
Originals with text and photographs mixed
(especially originals requiring higher
reproducibility on photos)
—Yes—
To Next Page
Loading...
Need help?
General
