2 HOW TO MAKE COPIES
54 Bypass Copying
6
Select the paper type.
1) Select the paper type.
2) Press [PRINTED] under "BACK PRINTED" to print on the back side of the paper.
3) Press [OK].
y e-STUDIO2550C Series:
y e-STUDIO5055C Series:
y If you select a wrong paper type, this could cause a paper misfeed or significant image trouble.
y When you select a paper type, you can confirm it with the icons displayed on the equipment
status indication area. For details, see the table in step 6 in "Copying on A3, A4, B4 and B5 size
paper (in equipment other than for North America) / LD, LT, LG and ST-R size paper (in
equipment for North America)".( P.48)
7
After setting the paper size and paper type, press [OK].
The menu returns to the BASIC menu.
8
Select other copy modes as required, and then press the [START] button on the control
panel.
Copying on an envelope
y The acceptable envelope sizes are as follows:
DL (110 mm x 220 mm), COM10 (4 1/8" x 9 1/2"), Monarch (3 7/8" x 7 1/2"), CHO-3 (120 mm x 235
mm), YOU-4 (105 mm x 235 mm)
y Refer to the Quick Start Guide for the recommended envelopes.
To Next Page
Loading...
Need help?
General
