1 PREPARATION
30 Preparation 1 - Turning Power ON
Saving energy when not in use - Energy saving mode -
To reduce power consumption, the equipment automatically enters into the energy saving mode
when a specified period of time has passed since its last use. You can also turn the equipment
into this mode manually.
The period of time at which the equipment enters into this mode is set at 20 minutes at the ship-
ment from the factory.
To turn the equipment into the energy saving mode manually
Press the [ENERGY SAVER] button on the control panel.
The equipment is now in the energy saving mode. The [ENERGY SAVER] lamp is lit.
Cancelling the energy saving mode
Press the [ENERGY SAVER] button. The energy saving mode is canceled.
The energy saving mode can be cancelled also in the following cases:
y When the Platen Cover or the Automatic Document Feeder (optional) is raised
y When this equipment and a PC are connected with a USB cable
y When printing is performed from a PC connected with this equipment
y When TOSHIBA Viewer is operated with a PC connected with this equipment
To Next Page
Loading...
Need help?
General
