102 Lists and Reports Functions for IP Faxing
0.Lists and Reports Functions for IP Faxing
FUNCTION LIST (Administrator)
The following table shows the IP Fax functions that are printed in the administrator’s function list, and the “User”
column indicates which functions are printed in a user’s function list. This table also describes each function. For
details on functions other than for IP Faxing, refer to the MFP Management Guide.
GENERAL
FAX
IP FAX
Function Description User
FUNCTIONS - IP FAX SEND Shows whether IP Fax transmission is enabled or
disabled.
NO
FUNCTIONS - IP FAX RECEIVE Shows whether IP Fax reception is enabled or
disabled.
NO
FUNCTIONS - NETWORK IP FAX Shows whether the Network IP Fax function is
enabled or disabled.
NO
Function Description User
TTI FOR IP FAX Shows whether TTI for IP Fax is enabled or disabled. YES
RTI FOR IP FAX Shows whether RTI for IP Fax is enabled or disabled. YES
Function Description User
IP FAX RECEIVED FORWARD - AGENT1 Shows the agent type if IP Fax Received Forward is
registered.
NO
IP FAX RECEIVED FORWARD - AGENT2 Shows the agent type if IP Fax Received Forward is
registered.
NO
SIP SETTING - ENABLE SIP Shows whether the SIP function is enabled or
disabled.
NO
SIP SETTING - TRANSPORT PROTOCOL Shows the transport protocol used when sending a
request by SIP.
NO
SIP SETTING - RECEPTION PORT NUMBER Shows the port number which receives SIP packets. NO
SIP SETTING - USER NAME Shows the SIP user name registered in the SIP
server.
NO
SIP SETTING - SIP SERVER SETTING Shows the SIP server setting. NO
SIP SETTING - REGISTRAR SERVER
SETTING
Shows the registrar server setting. NO
SIP SETTING - PROXY SERVER SETTING Shows the proxy server setting. NO
SIP SETTING - T.38 SETTING Shows the T.38 session setting. NO
GATEWAY SETTING - ENABLE VOIP
GATEWAY
Shows whether the T.38 supporting gateway is
enabled or disabled.
NO
GATEWAY SETTING - SIP TRANSPORT Shows the transport protocol used when sending a
request to the T.38 supporting gateway by SIP.
NO
GATEWAY SETTING - SIP RECEPTION PORT
NUMBER
Shows the port number which receives SIP packets
from the T.38 supporting gateway.
NO
GATEWAY SETTING - T.38 SETTING Shows the T.38 session setting. NO
To Next Page
Loading...
Need help?
General