33
2
EJECT
Push the center of the tape until it is automatically retracted into the TV/VCR.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
LOADING AND UNLOADING A VIDEO CASSETTE
UNLOADING
Pull the cassette out.
1
LOADING
AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically (See NOTE on page 40).
NOTES:
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is “OFF”.
OR
To unload a video cassette, press EJECT on
the remote control, or press STOP/EJECT on
the TV/VCR twice. The first press will stop the
tape in any mode. The second press will eject the
tape.
Use only video cassette tapes marked
.
2
1
STOP/EJECT
5L80101C P20-33 20/4/04, 16:2233
To Next Page
Loading...
Need help?
General
