- 116 -
Basic
Photography
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Getting Ready
In the Demo Mode, you will have the ability to take/save a limited number of images without the
SmartMedia™ card in place. The playback and downloading functions will be operational the same as in
the normal mode.
How to enter the Demo Mode
Set the mode dial to “SET-UP”.
Looking at the LCD monitor, set the cursor to “default”.
Push and hold the macro button while pushing the shutter button.
The LCD monitor will display “Changed to Demo Mode please restart”, and the
camera will power off automatically.
Power on the camera again. The LCD monitor will display Demo Mode. You are now set for
demonstrating the camera without the SmartMedia™ card.
How to return to the Normal Mode
Follow step 1 to 3 again, until the LCD monitor displays “Changed to Normal
Mode please restart”, and the camera will power down automatically.
Power on the camera again.
Memo
• Recorded Images will be erased when the camera powers off.
• During Burst Photography mode, normally at Full Size Resolution, the camera has the ability to take and
store a maximum of four images at Full Size Resolution and 16 images (maximum) at Half Size. In the
Demo Mode only, the number of images that can be taken will be reduced to half that quantity.
Demo Mode
To Next Page
Loading...
Need help?
General
