8-10 User’s Manual
Optional Devices
Removing a memory module
Before removing the memory module, make sure the computer is in boot
mode. To remove the memory module:
1. Be sure the power is off and all cables are disconnected from the
computer.
2. Turn the computer upside down and remove the battery and the screws
securing the memory module cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches outwards to release the module. A spring will force
one end of the module up.
5. Grasp the module by the sides and pull it out.
■ If you use the computer for a long time, the memory modules will
become hot. In this case, let the memory modules cool to room
temperature before you replace them. Otherwise, you may get burnt if
you touch the memory modules.
■ Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
To Next Page
Loading...
Need help?
General