31
Getting Started
Charging the main battery
Charging the main battery
The device battery is not accessible by the user.
Before using the battery to power the device, you must
charge the battery.
To charge the battery, leave the device plugged into an AC
power source with the device turned off until the battery light
glows white. After that, the battery will be completely
charged and ready to power the device.
Battery life and charge time may vary depending on the
applications power management settings, and features
used.
Using the device for the first time
The device is now ready for you to turn it on and begin using
it, see “Exploring Your Device’s Features” on page 79.
When opening or closing the display panel/tablet, place
one hand on the palm rest to hold the device in place and
use the other hand to slowly open or close the display
panel/tablet.
To avoid damaging the display panel/tablet when
opening it, do not force it beyond the point where it
moves easily and never lift the device by the display
panel/tablet, when it is attached to the keyboard.
Do not press or push on the display panel/tablet and be
careful to remove any pens or other objects from the
keyboard area before closing the display panel/tablet.
Initial setup
The Startup screen is the first screen displayed when you
turn on your device for the first time. Follow the on-screen
instructions on each screen in order to properly install the
operating system and begin using your device.
NOTE
NOTE
NOTE
To Next Page
Loading...
Need help?
General