To start playback in the stop mode.
Press PLAY.
To obtain a higher quality picture (When connected to a TV)
Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this player, you should generally reduce the
sharpness adjustment on the connected TV when viewing DVD video discs.
About
DVD-V VCD CD
The
DVD-V VCD CD
icons on the heading bar show the playable discs relevant to the
function described under each heading.
DVD-V
: DVD video discs.
VCD
: VIDEO CDs.
Start playback.
Press PLAY.
If you select a DVD video disc that contains a top
menu, or select a PBC (Playback Control)-
featured VIDEO CD (
9
), a menu may appear.
See “Locating a title using the top menu”.
24
• You may need to press the TOP MENU or MENU
button to display the disc menu (depending on the
actual DVD video disc.)
5
PLAY
MENU
SETUP
STOP
TOP MENU
5
/ / /
ENTER
PLAY
CD
: Audio CDs.
Notes
• Do not put an unplayable disc or any objects other than
discs in the disc holder.
• In many instances, a menu screen will appear after playback
of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching
that image onto its screen. To avoid this, be sure to press the
STOP button once the movie is completed.
PLAY
PLAY
1 Press SETUP.
The following on-screen display appears.
2 Press
/ to select “Language”, then press ENTER.
3 Press
/ to select “On-screen”, then press .
4 Select a language using
/ , then press ENTER.
5 Press SETUP.
The on-screen display disappears.
SETUP
ENTER ENTER
ENTER ENTER
ENTER ENTER
To change an on-screen language.
SETUP
CAUTION
Never operate the player in a moving vehicle.
Vibration may prevent proper playback of the player or
cause damage to the disc.
To Next Page
Loading...
Need help?
General
