54
Connections
Connecting to a TV or audio system
Connect the player to your TV or audio system.
For details of output sound, see
41
.
Connecting to a TV
To AV OUT To S VIDEO OUT
Signal flow
(yellow)
(red)
(white)
Audio/video
cable (supplied)
S video cable (supplied)
To audio inputs
If the TV has an S video input, connect the
player with an S video cable. When using an
S video cable, do not connect the yellow
video cable.
TV or monitor with
audio/video inputs
To video input
To S video input
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
• Make the following setting.
On-screen display Select:
Page
“Analog 2ch”
“Audio Out Select”
46
49
Selecting a monitor to view
Rear view
Slide the SELECT switch.
AV OUT: To use a connected TV or monitor.
LCD: To use the LCD of this player.
Note
If you switch the monitor using the SELECT switch during playback, a theme image
momentarily appears, then the playback resumes. Depending on the disc or the contents,
playback may start from another scene.
To Next Page
Loading...
Need help?
General
