19
Flushing the Toilet
●
●
The toilet can be flushed by pushing the flush button on the remote controller.
The toilet may be flushed in two ways: remotely or automatically.
How to flush the toilet using the Remote Control.
1
Press the following button
on the remote controller.
The toilet will flush.
When the batteries in the Remote Control are dead
●
●
Please flush the toilet by pressing the "Flush" button on the Main Unit Controls.
Press the Flush button on
the Main Unit Control
The toilet will be flushed
How to use automatic flush
●
●
Automatic flush works when the person steps away from the toilet. (This keeps people from forgetting to
flush.)
Auto Flush
On/Off button
The word “Flush”
is displayed.
Cover
Please make certain that the Remote Control displays the word "Flush."
1
The toilet flush button cannot be held down continuously. Please wait approximately 10 seconds before
the next flush.
Operation
To Next Page
Loading...
Need help?
General