31
Clean
●
●
Clean dust or debris on the filter with a
toothbrush or similar tool.
Reattach deodorizer filter.
●
●
With the mark on the deodorizer filter facing up,
place the filter in the guiding grooves of the
Washlet and press into place until it clicks.
(The filter cannot be inserted upsidedown.)
✲ If the deodorizer filter is not completely inside
the guiding grooves, it may fall out.
✲ Do not use the unit without a filter in place.
(Doing so can cause malfunctions.)
Click
Click
Guide
marking
faces up
Main Unit of Washlet
1
1
Cleaning the filter
●
●
The filter can be cleaned using water, but please remove all moisture before reinstalling.
●
●
If the filter is extremely dirty or blocked up, we recommend replacing it.
Cleaning the water supply filter.
Shut off the water valve and turn off the
water supply.
●
●
Shut off the water valve with the wrench provided.
●
●
When the water pressure gets low, it's time to clean the feed water supply filter.
Do not remove the feed water
filter with the water shutoff
valve in the OPEN position
Caution!
Prohibited
Maintenance
To Next Page
Loading...
Need help?
General