2-1. Driving procedures
The following procedures should be observed to ensure safe driv-
ing.
Starting the engine (P. 185, 181)
Driving
With the clutch pedal fully depressed, shift the shift lever to
“1”. (P. 189)
Release the parking brake. (P. 194)
Gradually release the clutch pedal. At the same time, gently
depress the accelerator pedal to accelerate the vehicle.
Stopping
With the clutch pedal fully depressed, depress the brake
pedal.
If necessary, set the parking brake.
When the vehicle is stopped for an extended period of time, shift
the shift lever to “N”. (P. 189)
Vehicles with a Stop & Start system: If the Stop & Start system is
enabled, shifting the shift lever to “N” and releasing the clutch
pedal will stop the engine.