4-3. Do-it-yourself maintenance
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Vehicles without smart entry & start system
Turn the engine switch to the “LOCK” position.
Vehicles with smart entry & start system
Turn the “ENGINE START STOP” switch OFF.
The fuses are located in the following places. To check the
fuses, follow the instructions below.
Engine compartment
Type A
Push the tab in and lift the lid
off.
Type B (if equipped)
Push the tab in and lift the lid
off.
To Next Page
Loading...
Need help?
General
