Toyota URBAN CRUISER User Manual

185
2-1. Driving procedures
2
When driving
URBAN CRUISER_OM_OM52C63E_(EE)
Engine (ignition) switch (vehicles with smart entry & start system)
Performing the following operations when carrying the electronic
key on your person starts the engine or changes “ENGINE START
STOP” switch modes.
 Starting the engine
Check that the parking brake is set.
Check that the shift lever is set in “N”.
Sit in the driver’s seat and firmly depress the clutch pedal.
The “ENGINE START STOP” switch indicator turns green.
Press the “ENGINE START
STOP” switch.
The engine can be started
from any “ENGINE START
STOP” switch mode.
Continue depressing the clutch
pedal until the engine is com-
pletely started. The engine will
crank until it starts or for up to
25 seconds, whichever is less.
Diesel engine only: indi-
cator turns on. The engine
begins starting after the indica-
tor light goes out.
STEP 1
STEP 2
STEP 3
STEP 4

Toyota URBAN CRUISER Specifications

General

Brand	Toyota
Model	URBAN CRUISER
Category	Automobile
Language	English