TP-Link omada EAP110-Outdoor User Manual

4
A DHCP server (typically a router) with DHCP function enabled is required to
assign IP addresses to the EAPs and clients in your local network.
EAP EAP EAPPC
Switch
Router
Internet
Clients
Typical Network Topology
EAP Controller

TP-Link omada EAP110-Outdoor Specifications

General

Band Technology	dual
Frequency Band	2.4 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100
Wireless Networking Standard	wi-fi 4
Wireless Standard	n
2.4 Ghz Streams	1
5.0 Ghz Streams	0
Gigabit Ethernet Speed	no
Antennas	2
Firewall	other
Data Encryption	yes
Encryption Type	wep, wpa, wpa-psk, wpa2-enterprise, wpa2-psk
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
WAN Ports	1
Built In Modem	no
Bluetooth	no
System Requirements	microsoft windows 10/8/7/vista/xp

Weight and Dimensions

Height	1.9 inches
Width	7.1 inches
Net Weight	2 pounds