TP-Link omada EAP110-Outdoor User Manual

6
Hardware Installation
Mount EAP
Option 1: Pole Mounting
Lead the end of the pole mounting
strap through the back of the EAP.
Step 1:
Position the EAP and wrap the pole
mounting strap around the pole.
Feed the end through the
screw-block and tighten the strap
until the EAP is secure.
Step 2:
Connect the antennas to the EAP.
Step 3:
The EAP can be pole-mounted or wall-mounted when working
independently.

TP-Link omada EAP110-Outdoor Specifications

General

Band Technology	dual
Frequency Band	2.4 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100
Wireless Networking Standard	wi-fi 4
Wireless Standard	n
2.4 Ghz Streams	1
5.0 Ghz Streams	0
Gigabit Ethernet Speed	no
Antennas	2
Firewall	other
Data Encryption	yes
Encryption Type	wep, wpa, wpa-psk, wpa2-enterprise, wpa2-psk
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
WAN Ports	1
Built In Modem	no
Bluetooth	no
System Requirements	microsoft windows 10/8/7/vista/xp

Weight and Dimensions

Height	1.9 inches
Width	7.1 inches
Net Weight	2 pounds