Trane CH530 User Manual

52 AFDK-SVU01C-EN
Startup Test Log
Water-Cooled CenTraVac Chiller with Tracer
AdaptiView Control and Adjustable Frequency
Drive (AFD) Starter
Job Name AFD Serial Number
Job Location AFD Model Number
Sales Order Number Ship Date
Chiller Serial Number Start Date
Chiller Model Number
Starter Date: Tracer™ TU: Service Setpoints View: AFD Default Setting
Manufacture AFD Control Auto
Type Re-Optimization Sensitivity 20%
Vender ID
Model Number
UC800 or DynaView™ Starter Type: 
Unit Mount AFD
Tracer TU: Configuration View: Starter
Trane
Default
SettingVolts & Hz
Amps
Motor Data: Restart Inhibit Stop to Start Time 30
Manufacturer Surge Protection enable
Type & Frame Surge Sensitivity 20
Drawing # Power Loss Reset Time 60
Serial Number Unit Line Voltage *
Nameplate Data: Motor NP FLA (TVA) *
RLA Motor NP RLA *
KW Motor NP Power *
Volts & Hz Motor NP Hertz *
Prestart Checks Date Checked Motor NP PRM *
Drive Grounded Stator Resistance *
Motor Rotation Flux Current Ref. *
Drive Chassis Grounded Acceleration Time 30
Control Wiring Tight Deceleration Time 30
Drive Connections are Tight Starter Current Limit *
Verified Settings Current Limit Gain 10
Power Loss Mode Decel
Comments: Power Loss Time 0
Flying Start Disable
Flying Start Gain 2000
Use Trane Defaults (for all other AFD
parameters not accessible via Tracer TU)
Yes
RTD Type 75
*Must be set per sales order variable.
Test Log Date: Log 1 Log 2
Tracer TU Unit Status View: AF
AFD Output Power (KW)
Speed
Frequency
AFD Transistor temp
Tracer TU Field Startup View: AFD
Maximum Frequency 60
Minimum Frequency 38
AFD Surge Capacity Increase 1
Tracer TU Status View: Motor
Average Line Current
Starter Average Phase Voltage
Starter Load Power Factor
Motor Winding #1 temp
Motor Winding #2 temp
Motor Winding #3 temp

Trane CH530 Specifications

General

Brand	Trane
Model	CH530
Category	Industrial Equipment
Language	English